NEC Univerge SV8100 - Page 442

Issue 5.0 UNIVERGE SV8100
1 - 432 Direct Station Selection (DSS) Console
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
10-03-01 ETU Setup (DLCA PKG Setup) –
Terminal Type (B1)
Use to setup and confirm the
Basic Configuration data for
terminal type (B1).
0 = Not set
1 = Multiline Terminal
2 = SLT Adapter
3 = Bluetooth Cordless
Handset
6 = PGD (Paging)
7 = PGD (Tone Ringer)
8 = PGD (Doorbox)
9 = PGD (ACI)
10 = DSS Console
11 = -- Not Used --
(default = 0)
15-02-08 Multiline Telephone Basic Data
Setup – Automatic Handsfree
Set to 1 for a DSS Console to
have one-touch operation. If set to
0, the user must lift the handset
before pressing a DSS key for the
call to complete.
0 = Preselect
1 = One-Touch
(Automatic
Handsfree)
(default = 1)
20-06-01 Class of Service for Extensions Assign Class of Service (1~15) to
extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
Allows a busy extension ability to
manually (0) or automatically (1)
receive off-hook signals.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-13-49 Class of Service Options
(Supplementary Service) – BLF
Indication on CO Incoming State
Determine if a BLF of the station
will light when a Normal CO call is
ringing the phone.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-17-01 Operator Extension – Operator’s
Extension Number
Define the extension numbers
which are to be used by operators.
Up to eight digits
(default = 101)
30-01-01 DSS Console Operating Mode Set the mode of the system DSS
Consoles. The available options
are Regular (Business) Mode (0),
Hotel Mode (1), ACD Monitor
Mode (2) or Business/ACD Mode
(3).
0 = Business Mode
1 = Hotel Mode
2 = ACD Monitor Mode
3 = Business/ACD
Mode
(default = 0)