NEC Univerge SV8100 - 47-12 InMail Answer Schedules

Issue 5.0 UNIVERGE SV8100
1 - 434 Direct Station Selection (DSS) Console
30-05-10 DSS Console Lamp Table – Hotel
Status Code 2 (Hotel DSS)
Use to define the LED patterns for
hotel status code 2 on the DSS
consoles.
0~7
[default = 1 (FL)]
30-05-11 DSS Console Lamp Table – Hotel
Status Code 3 (Hotel DSS)
Use to define the LED patterns for
hotel status code 3 on the DSS
consoles.
0~7
[default = 2 (WK)]
30-05-12 DSS Console Lamp Table – Hotel
Status Code 4 (Hotel DSS)
Use to define the LED patterns for
hotel status code 4 on the DSS
consoles.
0~7
[default = 3 (RW)]
30-05-13 DSS Console Lamp Table – Hotel
Status Code 5 (Hotel DSS)
Use to define the LED patterns for
hotel status code 5 on the DSS
consoles.
0~7[(default = 5 (IL)]
30-05-14 DSS Console Lamp Table – Hotel
Status Code 6 (Hotel DSS)
Use to define the LED patterns for
hotel status code 6 on the DSS
consoles.
0~7
[default = 3 (RW)]
30-05-15 DSS Console Lamp Table – Hotel
Status Code 7 (Hotel DSS)
Use to define the LED patterns for
hotel status code 7 on the DSS
consoles.
0~7[(default = 6 (IW)]
30-05-16 DSS Console Lamp Table – Hotel
Status Code 8 (Hotel DSS)
Use to define the LED patterns for
hotel status code 8 on the DSS
consoles.
0~7
[default = 4 (IR)]
30-05-17 DSS Console Lamp Table – Hotel
Status Code 9 (Hotel DSS)
Use to define the LED patterns for
hotel status code 9 on the DSS
consoles.
0~7
[default = 3 (RW)]
30-05-18 DSS Console Lamp Table – Hotel
Status Code 0 (Hotel DSS)
Use to define the LED patterns for
hotel status code 0 on the DSS
consoles.
0~7
[default = 0 (Off)]
30-05-19 DSS Console Lamp Table – Hotel
Status Code
* (Hotel DSS)
Use to define the LED patterns for
hotel status code
* on the DSS
consoles.
0~7
[default = 4 (IR)]
30-05-20 DSS Console Lamp Table – Hotel
Status Code
# (Hotel DSS)
Use to define the LED patterns for
hotel status code
# on the DSS
consoles.
0~7
[default = 5 (IL)]
30-05-21 DSS Console Lamp Table – VM
Message Indication
Use to define the LED patterns for
VM message indications on the
DSS consoles.
0~7
[default = 3 (RW)]
30-10-01 DSS Console IP Terminal Setup
– MAC Address
Read Only program that displays
the MAC address of the IP
terminal a DSS console is
associated with.
00-00-00-00-00-00 ~
FF-FF-FF-FF-FF-FF
(Default =
00-00-00-00-00-00)
Program
Number
Program Name Description/Comments Assigned Data