NEC Univerge SV8100 - Page 451

UNIVERGE SV8100 Issue 5.0
Directed Call Pickup 1 - 441
Guide to Feature Programming
Operation
To use Directed Call Pickup to intercept a call to a co-worker’s extension:
1. Pick up the handset or press Speaker.
2. Dial 715.
3. Dial number of extension whose call you want to intercept.
Program
Number
Program Name Description/Comments Assigned Data
11-12-25 Service Code Setup (for Service
Access) – Direct Call Pickup -
Own Group
Use to customize the Service
Codes for direct call pickup – own
group.
MLT, SLT
(default = 856)
11-12-26 Service Code Setup (for Service
Access) – Call Pickup for
Specified Group
Use to customize the Service
Codes for call pickup for specified
group.
MLT, SLT
(default = 868)
11-12-27 Service Code Setup (for Service
Access) – Call Pickup
Use to customize the Service
Codes for call pickup.
MLT, SLT
(default = 867)
11-12-28 Service Code Setup (for Service
Access) – Call Pickup for
Another Group
Use to customize the Service
Codes for call pickup for another
group.
MLT, SLT
(default = 869)
11-12-29 Service Code Setup (for Service
Access) – Direct Extension Call
Pickup
Use to customize the Service
Codes for direct extension call
pickup.
MLT, SLT
(default = 715)
11-12-30 Service Code Setup (for Service
Access) – Specified Trunk
Answer
Use to customize the Service
Codes for specified trunk answer.
MLT, SLT
(default = 772)
20-06-01 Class of Service for Extensions Assign a Class of Service to
extensions (1~15).
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
20-10-05 Class of Service Options
(Answer Service) – Directed Call
Pickup for Own Group
Turns off or on Directed Call
Pickup for calls ringing an
extension Pickup Group (Service
Code 856).
0 = Off
1 = On
(default = 1 for
COS 1~15)