UNIVERGE SV8100 Issue 5.0
Directory Dialing 1 - 445
Operation
To use Directory Dialing from a multiline terminal with an LCD:
1. Press the Dir softkey.
2. Press the softkey for the Directory Dialing type:
o SPD–Speed Dials
o EXT–co-worker’s Extensions
o STA–Personal Speed Dials
o TELBK–Telephone Book
. Directory Dialing follows any feature restrictions that your system may have enabled. For example, if your
extension cannot normally use Speed Dial – System/Group/Station, Directory Dialing can not access it either.
3. Dial letter/number range for the party you want to call (e.g., dial 2 for A, B, C or 2).
. You can enter several letters to help narrow the search.
. Press # to enter additional letters on the same key (ex: TOM = 8666#6).
4. Press the Down Arrow softkey to jump to that section.
5. Press the Volume s or t key to scroll through the list.
. If you wait too long between your selections, Directory Dialing automatically cancels.
6. Lift the handset or press the DIAL softkey, or press Speaker to place the selected call.
. If you selected an outside call, it routes according to your system Trunk Group Routing/ARS setup.
To cancel Directory Dialing:
Press the Exit key.
To Next Page
Loading...
