NEC Univerge SV8100 - Page 466

Issue 5.0 UNIVERGE SV8100
1 - 456 Do Not Disturb
Guide to Feature Programming
Operation
To activate or deactivate Do Not Disturb while your extension is idle:
Multiline Terminal Using Softkeys
1. Do not lift handset.
Program
Number
Program Name Description/Comments Assigned Data
11-11-08 Service Code Setup (for Setup/
Entry Operation) – Do Not
Disturb
Assign Service Code for DND. MLT, SLT
(default = 847)
11-12-01 Service Code Setup (for Service
Access) – Bypass Call
Assign Service Code for DND. MLT, SLT
(default = 807)
11-16-06 Single Digit Service Code Setup
– DND/Call Forward Override
Bypass
If a single digit service code is to
be used, assign an available code
number.
(default not assigned)
15-07-01 Programmable Function Keys Use to assign functions to multiline
terminal line keys (DND = 3).
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to an extension.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
20-13-04 Class of Service Options
(Supplementary Service) – Call
Forward/DND Override (Bypass
Call)
Turns Off or On an extension
ability to use Call Forwarding/DND
Override.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-13-40 Class of Service Options
(Supplementary Service) – Do
Not Disturb
Turn Off or On an extension user
ability to set or cancel Do Not
Disturb.
0 = Off
1 = On
(default = 1 for
COS 1~15)