UNIVERGE SV8100 Issue 5.0
Analog Communications Interface (ACI) 1 - 37
Physical Ports and Software Ports
Each PGD(2)-U10 ADP consists of a physical port for connection to the telephone system and two logical
ports. For programming purposes, the ports are also called software ports. The physical port connects to
a station position on a ESI ETU. During installation, the first PGD(2)-U10 ADP you set up is physical port 1;
the second PGD(2)-U10 ADP is physical port 2, etc. Each PGD(2)-U10 ADP has two software ports,
which are numbered independently of the physical ports. Normally, the first PGD(2)-U10 ADP set up has
software ports 1~2; the second PGD(2)-U10 ADP has software ports 3~4, etc. There are a total of 96
software ports (48 PGD(2)-U10 ADPs x 2 ports each). During programming, you assign ACI extension
numbers and Department Group options to PGD(2)-U10 ADP software ports, not physical ports. During
installation, you connect equipment to the jacks on the PGD(2)-U10 ADP that correspond to the software
port. Refer to the UNIVERGE SV8100 System Hardware Manual for installation details.
Conditions
z ACD agents who are logged on can be recorded.
z When ACI software ports are set to be a Background Music music source, it only plays to a
speaker, not a multiline telephone.
z An extension cannot have Hotline keys for ACI software ports. Music on Hold ACI software
ports can be Music on Hold music sources.
z An extension can have One-Touch Keys for ACI software ports. The gives the extension
user:
o One-Touch access to external music
o One-Touch External Paging
o One-Touch loud ringer control
z ACI software ports can provide External Paging with control, independent of the External
Paging circuits on the CD-CP00. The PGD(2)-U10 ADP can be connected to any DLC port.
The devices connected to the PGD(2)-U10 ADP must be compatible with the specifications
below. Refer to the UNIVERGE SV8100/SV8300 System Hardware Manual for installation details.
PGD(2)-U10 ADP
/ACI Interface Specifications
Relay Contacts
Maximum Contact Ratings 30 V DC @ 60 mA
90 V AC @ 10 mA
Minimum Application Load 1 V DC @ 1 mA
Audio/Music Input
Input Impedance 47 K Ohms @ 1 K Hz
To Next Page
Loading...
