UNIVERGE SV8100 Issue 5.0
Embedded VRS 1 - 479
20-17-01 Operator Extension – Operator’s
Extension Number
Designate an extension an
operator. When a message is left
in the embedded VRS mailbox,
the notification is displayed on this
extension
Up to eight digits
(default not assigned)
21-01-02 System Options for Outgoing
Calls – Intercom Interdigit Time
When placing Intercom calls,
users must dial each digit within
this time.
0~64800 (seconds)
(default = 10 seconds)
22-02-01 Incoming Call Trunk Setup For each Night Service mode,
enter 1 if trunk should be
automatically answered by VRS
Automated Attendant.
Trunks 1~200
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
24-02-03 System Options for Transfer –
Delayed Call Forwarding Time
Set how long a telephone rings
before the call reroutes to the
programmed destination.
0~64800 (seconds)
(default = 10)
25-01-02 VRS/DISA Line Basic Data Setup
– DISA User ID
Select whether or not the DISA
User ID is to be used.
0 = Off
1 = On
(default = 1)
25-02-01 DID/DISA VRS Message For each Night Service mode,
enter 1 at the “Talkie” prompt if
trunk should be automatically
answered by VRS and the
message number the caller should
hear (1~100).
0 = No Message
1 = 01~100 (VRS
Messages)
2 = 01~4 (ACI Group
Number)
3 = 01~64 (Extension
Group Number)
(default = 0)
Program
Number
Program Name Description/Comments Assigned Data
To Next Page
Loading...
