Issue 5.0 UNIVERGE SV8100
1 - 482 Embedded VRS
25-15-02 DISA Transfer Target Setup –
DISA Transfer Target Area at No
Answer or Busy
Used to assign a speed dial
number when a dial tone times-out
and the target extension does not
answer or is busy.
Speed Dial bin number
0 ~ 1999.
(default = 1999)
Version 3 software or
higher is required.
40-07-01 Voice Prompt Language
Assignment for VRS
Select the language to be used for
the VRS (default = 2, English).
Although the system allows this
option to be changed in
programming, the language
changes only if the newly selected
language is installed.
1 = US English
2 = UK English
3 = Australian English
4 = French Canadian
5 = Dutch
6 = Mexican Spanish
7 = Latin America
Spanish
8 = Italian
9 = German
10 = Madrid Spanish
11 = Norwegian
12 = Parisian French
13 = Brazilian
Portuguese
14 = Japanese
15 = Mandarin Chinese
16 = Korean
17 = Iberian
Portuguese
18 = Greek
19 = Danish
20 = swedish
21 = Thai
22 = Taiwan
23 = Flemish
24 = Turkish
(default = 2)
40-10-01 Voice Announcement Service
Option – VRS Fixed Message
Enable (1) or disable (0) the
system ability to play the fixed
VRS messages (such as “You
have a message.”).
0 = Not Used
1 = Used
(default = 0)
40-10-02 Voice Announcement Service
Option – General Message
Number
Enter the number of the VRS
message you want to use for the
General Message (01~04). The
message you select should not be
used as a VRS message.
0~100
(0=No General
Message Service)
(default = 0)
40-10-03 Voice Announcement Service
Option – VRS No Answer
Destination
When all VRS ports are busy,
incoming DILs and DISA calls wait
for the VRS No-Answer Time
(Program 40-10-04) and then ring
the VRS No Answer Destination
Ring Group.
0~100
(Incoming Ring
Group Number)
(default = 0)
Program
Number
Program Name Description/Comments Assigned Data
To Next Page
Loading...
