NEC Univerge SV8100 - Page 494

Issue 5.0 UNIVERGE SV8100
1 - 484 Embedded VRS
Operation
VRS Messages
To record a VRS message:
1. Press Speaker or lift the handset.
- OR -
At a single line telephone, lift the handset.
2. Dial 716.
3. Dial 7 (
Record).
4. Dial the VRS message number you want to record (001~100).
5. When you hear, “Please start recording” followed by a beep, record your message.
6. Press
# to end recording
- OR -
Hang up to save the message.
To listen to a previously recorded VRS message:
1. Press Speaker or lift the handset.
- OR -
At a single line telephone, lift the handset.
2. Dial 716.
3. Dial 5 (
Listen).
4. Dial the VRS message number to which you want to listen (001~100).
. You hear the previously recorded message. If you hear a beep instead, no previous message is recorded.
5. Press # to hear the message again.
- OR -
To hear another message, dial 5 and then enter the message number (001~100).
- OR -
Hang up.
To listen to a recorded Embedded VRS mailbox message:
1. Press Speaker or lift the handset.
- OR -