NEC Univerge SV8100 - Page 558

Issue 5.0 UNIVERGE SV8100
1 - 548 Handset Mute
Guide to Feature Programming
Operation
While talking on a terminal handset:
1. Press the Handset Transmission Cut-Off key (Program15-07-01; Key 40 or SC 851 Key Code
40).
Program
Number
Program Name Description/Comments Assigned Data
15-07-01 Programmable Function Keys Assign a function key for Handset
Transmission Cut Off (code 40).
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)