NEC Univerge SV8100 - Page 59

UNIVERGE SV8100 Issue 5.0
Answer Hold 1 - 49
Related Features
Answer Key
Central Office Calls, Answering
Guide to Feature Programming
Operation
Program
Number
Program Name Description/Comments Assigned Data
15-02-06 Multiline Telephone Basic Data
Setup – Hold Key Operating
Mode
Use this option to set the function
of the Multiline Hold key. The Hold
key can activate normal Hold or
Exclusive Hold.
0 = Normal (Common)
1 = Exclusive Hold
(default = 0)
15-07-01 Programmable Function Keys Assign a park group to multiline
terminal line key.
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
11-12-32 Service Code Setup (for Service
Access) – Answer for Park Hold
Assign for a key on the multiline
terminal or single line telephone
for park hold.
MLT, SLT
(default = 861)
20-09-01 Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DIL/
E&M Override
Turns Off (0) or On (1) the
extension ability to receive a
second call from a DID, DISA, DIL,
or tie line caller.
. With this option set to 1, the
destination extension must be
busy for a second DNIS caller
to ring through. If the
destination extension does not
have a trunk or CAP key
available for the second call
and a previous call is ringing
the extension but has not yet
been answered, the second
caller hears busy regardless of
this program setting.
0 = Off
1 = On
(default = 1 for COS
01~15)