NEC Univerge SV8100 - Page 595

UNIVERGE SV8100 Issue 5.0
Hotel/Motel 1 - 585
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
10-20-01 LAN Setup for External
Equipment – TCP Port
Define the TCP port (0~65535)
when communicating to the SMDR
(type 5).
0~65535
default:
External Device 1 (CTI
Server) = 0
External Device 2
(ACD MIS) = 0
External Device 5
(SMDR Output) = 0
External Device 6 (DIM
Output) = 0
External Device 11
(O&M Server) = 8010
External Device 12
(Traffic Report Output)
= 0
External Device 13
(Room Data Output for
Hotel Service ) = 0
10-55 Package Network Setup For the PVA or UM8000 blade
configure the network parameters
required to communicate with the
blade
10-55-01 - IP Address
10-55-02 - LAN Setup
10-55-03 - Main/Addon
10-55-04 - S/Net Mask
10-55-05 - Gateway
11-10-16 Service Code Setup (for System
Administrator) – Leaving
Message Waiting (Requires CPU
to be licensed for Hotel/Motel)
Customize the leave message
waiting Service Codes for the
System Administrator (CD-CP00
must be licensed for Hotel/Motel).
MLT
(default = 726)
11-14-01 Service Code Setup (for Hotel) –
Set DND for Own Extension
Customize the set DND for own
extension used with the Hotel/
Motel feature (CD-CP00 must be
licensed for Hotel/Motel).
MLT, SLT
(default = 727)
11-14-02 Service Code Setup (for Hotel) –
Cancel DND for Own Extension
Customize the cancel DND for
own extension used with the
Hotel/Motel feature (CD-CP00
must be licensed for Hotel/Motel).
MLT, SLT
(default = 728)
11-14-03 Service Code Setup (for Hotel) –
Set DND for Other Extension
Customize the set DND for other
extension used with the Hotel/
Motel feature (CD-CP00 must be
licensed for Hotel/Motel).
MLT, SLT
(default = 729)
11-14-04 Service Code Setup (for Hotel) –
Cancel DND for Other Extension
Customize the cancel DND for
other extension used with the
Hotel/Motel feature (CD-CP00
must be licensed for Hotel/Motel).
MLT, SLT
(default = 730)