NEC Univerge SV8100 - Page 615

UNIVERGE SV8100 Issue 5.0
Intercom 1 - 605
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
11-11-13 Service Code Setup (for Setup/
Entry Operation) – Display
Language Selection for Multiline
Terminal
Select the service code which can
be used at an extension to change
the displayed language on a
multiline terminal display.
MLT
(default = 778)
15-02-01 Multiline Telephone Basic Data
Setup – Display Language
Selection
(To select options 8~10, press
either 8 or Recall, then press line
keys 1~3. Key 1 is option 8, Key 2
is option 9, and Key 3 is option 10.)
Select the language to be
displayed on a multiline terminal
display.
0 = Japanese
1 = English
2 = German
3 = French
4 = Italian
5 = Spanish
6 = Dutch
7 = Portuguese
8 = Norwegian
9 = Danish
10 = Swedish
11 = Turkish
12 = Latin American
Spanish
13 = Romanian
14 = Polish
(default = 1)
20-06-01 Class of Service for Extensions Assign Class of Service (1~15) for
extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
20-08-01 Class of Service Options
(Outgoing Call Service) –
Intercom Calls
Turns off or on Intercom calling for
the extension.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-08-11 Class of Service Options
(Outgoing Call Service) – Protect
for the Call Mode Switching from
Caller
When an extension is set to ring
mode for ICM calls, enabling this
option prevents callers from
changing the call to voice
announce mode.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-11-07 Class of Service Options (Hold/
Transfer Service) – Transfer
Without Holding
Turns Off or On an extension
ability to use Transfer Without
Holding.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-13-22 Class of Service Options
(Supplementary Service) – Busy
Status Display (Called Party
Status)
Turns Off or On the ability to
display the detailed state of the
called party.
0 = Off
1 = On
(default = 0 for
COS 1~15)