NEC Univerge SV8100 - Page 654

Issue 5.0 UNIVERGE SV8100
1 - 644 Long Conversation Cutoff
Related Features
Central Office Calls, Answering
Central Office Calls, Placing
Direct Inward System Access (DISA)
Multiple Trunk Types
Warning Tone for Long Conversation
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
14-01-14 Basic Trunk Data Setup – Long
Conversation Cutoff
Enable (1) or disable (0) a trunk
ability to disconnect incoming and
outgoing central office calls
automatically.
0 = Disable
1 = Enable
(default = 0)
14-01-15 Basic Trunk Data Setup – Long
Conversation Alarm Before Cut
Off
Enable (1) or disable (0) the Long
Conversation Alarm for each
trunk.
0 = Disable
1 = Enable
(default = 0)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
20-13-02 Class of Service Options
(Supplementary Service) – Long
Conversation Cutoff (Incoming)
Turns Off (0) or On (1) an
extension ability to use Long
Conversation Cutoff for incoming
calls.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-13-03 Class of Service Options
(Supplementary Service) – Long
Conversation Cutoff
(Outgoing)
Turns Off (0) or On (1) an
extension ability to use Long
Conversation Cutoff for outgoing
calls.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-21-03 System Options for Long
Conversation – Long
Conversation Cutoff for
Incoming Call
Enter the time the system waits
before disconnecting incoming
trunks (0~64800 seconds).
0~64800 (seconds)
(default = 0)