NEC Univerge SV8100 - Page 669

UNIVERGE SV8100 Issue 5.0
Meet Me Paging 1 - 659
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
11-12-21 Service Code Setup (for Service
Access) – Meet-Me Answer to
Specified Internal Paging Group
Use to customize the Service
Codes used for meet-me answer
to specified internal paging group
service access.
MLT, SLT
(default = 864)
11-12-22 Service Code Setup (for Service
Access) – Meet-Me Answer to
External Paging
Use to customize the Service
Codes used for meet-me answer
to external paging service access.
MLT, SLT
(default = 865)
11-12-23 Service Code Setup (for Service
Access) – Meet-Me Answer in
Same Paging Group
Use to customize the Service
Codes used for meet-me answer
in same paging group service
access.
MLT, SLT
(default = 863)
15-07-01 Programmable Function Keys Assign function keys for External
Zone Paging (code 19 + zone),
External All Call Paging (code 20),
Internal Zone Paging (code 21 +
zone) or Meet Me Conference/
Paging Pickup (code 23).
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to an extension.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
20-10-06 Class of Service Options
(Answer Service) – Meet-Me
Conference and Paging
Turns Off (0) or On (1) an
extension to use Meet-Me
Conference and Paging.
0 = Off
1 = On
(default = 1 for
COS 1~15)
31-02-01 Internal Paging Group
Assignment – Internal Paging
Group Number
Assign extensions to Internal
Paging Groups (i.e., Page Zones).
0~64
(0 = No Setting)
Default:
0 for IP Station
1 for TDM Station