NEC Univerge SV8100 - Page 677

UNIVERGE SV8100 Issue 5.0
Meet Me Paging Transfer 1 - 667
4. From a multiline terminal, when the paged party answers, press Transfer or the Transfer softkey.
- OR -
From a single line telephone, when the paged party answers, hang up.
. The party is transferred.
To join a Meet Me External Paging Transfer:
1. At the multiline terminal, press Speaker or pick up handset.
- OR -
At single line telephone, lift the handset.
2. Dial 865.
3. Dial the announced External Paging Zone (0~8).
. The Paging party is connected.
4. Stay on the line.
From a multiline terminal, press Transfer or the Transfer softkey.
- OR -
From a single line telephone, hang up.
. The party is transferred.
Meet Me Internal Paging Transfer
To make a Meet Me Internal Paging Transfer:
1. At multiline terminal, while on a call, press Hold.
- OR -
At the single line telephone, while on a call, hookflash.
2. Press Internal Paging Zone key (Program 15-07 or SC 851: 21 + zone or 22 for all internal
zones).
- OR -
Dial 801 and the Internal Paging Zone code (0~9 or 00~64).
- OR -
Dial 751 and the Combined Paging Zone code 1~8 (for Internal/External Zones 1~8) or 0 (for
Internal/External All Call).
3. Announce the call.
4. From a multiline terminal, when the paged party answers, press Transfer or the Transfer softkey.
- OR -
From a single line telephone, when the paged party answers, hang up.
. The party is transferred.