Issue 5.0 UNIVERGE SV8100
1 - 682 Microphone Cutoff
Related Features
Handsfree Answerback/Forced Intercom Ringing
Handset Mute
Programmable Function Keys
Guide to Feature Programming
Operation
To mute your telephone handset or Handsfree microphone while on a call:
1. Press MIC.
. This only turns off the Handsfree microphone.
- OR -
Press the Microphone Cutoff key (Program 15-07 or SC 851: 40).
Program
Number
Program Name Description/Comments Assigned Data
15-07-01 Programmable Function Keys If an extension needs handset
microphone cutoff, program a
Handset Transmission Cutoff key
(code 40). To program a MIC
Cutoff key, use code 02 as the
entry. The MIC Cutoff key mutes
conversation on a handsfree call,
but the Handset Transmission
Cutoff key mutes the handset
transmission on a non-handsfree
call.
For Line Keys: 1~48
0 ~ 99 (Normal
Function Code)
(default = Service
Code 851)*
00
* ~ *99
(Appearance Function
Code) (default =
Service Code 852)
20-02-11 System Options for Multiline
Telephones – Handsfree
Microphone Control
Use this option to control the
setting for multiline terminal
handsfree microphone after being
disconnected and reconnected. If
set to 0, the microphone is always
off when the terminal is
reconnected. If set to 1, the
microphone remains in the same
state it was in when the terminal is
reconnected.
0 = Off
1 = On
(default = 1
To Next Page
Loading...
