NEC Univerge SV8100 - Page 730

Issue 5.0 UNIVERGE SV8100
1 - 720 Name Storing
Required Component(s)
None
Related Features
Directory Dialing
Single Line Telephones
Speed Dial – System/Group/Station
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
11-11-22 Service Code Setup (for Setup/
Entry Operation) – Extension
Name Programming
Used to customize the service
code used to edit Extension Name
Programming.
MLT
(default = 800)
14-01-01 Basic Trunk Data Setup – Trunk
Name
Set the names for trunks. The
trunk name displays on a multiline
terminal for incoming and outgoing
calls.
Up to 12 Characters
Line 001
Line 002
Line 003
:
Line 200
15-01-01 Basic Extension Data Setup –
Extension Name
Define the extension/virtual
extension name.
Up to 12 characters
Default:
STA 200 = Ext 200
STA 201 = Ext 201,
etc.
20-09-02 Class of Service Options
(Incoming Call Service) – Caller
ID Display
Turns Off (0) or On (1) the Caller
ID display at an extension.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-13-21 Class of Service Options
(Supplementary Service) –
Extension Name
Turns Off (0) or On (1) an
extension user ability to program
its name.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-13-47 Class of Service Options
(Supplementary Service) –
Station Number Display
Determine if a station Number will
be displayed (On) or not displayed
(Off) in the LCD when the phone is
in an idle state.
0 = Off
1 = On
(default = 1 for
COS 1~15)