NEC Univerge SV8100 - Page 736

Issue 5.0 UNIVERGE SV8100
1 - 726 Night Service
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
11-10-01 Service Code Setup (for System
Administrator) – Night Mode
Switching
Customize the service code (818)
to be used for day/night mode
switching.
MLT,SLT
(default = 818)
11-10-12 Service Code Setup (for System
Administrator) – Night Mode
Switching for Other Group
Customize the service code (718)
to be used for Day/Night mode
switching for another Night service
group.
MLT
(default = 718)
11-12-43 Service Code Setup (for Service
Access) – Answer No-Ring Line
(Universal Answer)
Customize the service code (872)
to be used to manually answer a
Universal Night Answer.
MLT, SLT
(default = 872)
11-12-50 Service Code Setup (for Service
Access) – General Purpose
Relay
Define the service code to be used
for turning the general purpose
relay on and off.
MLT, SLT
(default = 880)
12-01-01 Night Mode Function Setup –
Manual Night Mode Switching
Turn Off (0) or On (1) any
extensions from activating Manual
Night Service.
0 = Off
1 = On
(default = 1)
12-01-02 Night Mode Function Setup –
Automatic Night Mode Switching
According to a preset schedule,
enable (1) or disable (0) Automatic
Night Service for the system.
Make sure to set the Service
Patterns in Program 12-02-01,
Program 12-02-02 and Program
12-02-03.
0 = Off
1 = On
(default = 0)
12-02-01 Automatic Night Service – Start
Time
For each Night Service Group,
enter up to 20 start times for each
Time Pattern (1~10).
The first pattern start time (Pattern
1) should begin at 00:00
(midnight).
0000~2359
Please refer to the
SV8100 Programming
manual for default
settings.
12-02-02 Automatic Night Service – End
Time
For each Night Service Group
(01~32), enter up to 20 end times
(0000~2359) for each Time
Pattern (1~10).
0000~2359
Please refer to the
SV8100 Programming
manual for default
settings.
12-02-03 Automatic Night Service –
Operation Mode
For each Night Service Group
(01~32), define the Night Service
Mode (1~8) for up to 20 start/end
times for each Time Pattern
(1~10).
1~8
Please refer to the
SV8100 Programming
manual for default
settings.