NEC Univerge SV8100 - Page 781

UNIVERGE SV8100 Issue 5.0
Paging, Internal 1 - 771
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
11-12-19 Service Code Setup (for Service
Access) – Internal Group Paging
Service code setup. MLT, SLT
(default = 801)
11-12-24 Service Code Setup (for Service
Access) – Combined Paging
Combined paging, internal/
external access code. Service
code setup.
MLT, SLT
(default = 751)
15-07-01 Programmable Function Keys Assign function keys for Internal
Paging Zones (code 21 + page
zone) and Internal All Call Paging
(code 22).
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to an extension.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
20-13-29 Class of Service Options
(Supplementary Service) –
Paging Display
Turns Off (0) or On (1) an
extension user ability to display
paging information.
0 = Off
1 = On
(default = 1 for
COS 1~15)
31-01-01 System Options for Internal/
External Paging – All Call Paging
Zone Name
Assign a name to the All Call
Internal Paging Zone. The name
shows on the display of the
telephone making the
announcement.
Up to 12
Characters
(default = Group All)
31-01-02 System Options for Internal/
External Paging – Page
Announcement Duration
Set the maximum allowable
duration for a Paging
announcement (External Paging
only).
0~64800 (seconds)
(default = 1200
seconds)
31-02-01 Internal Paging Group
Assignment – Internal Paging
Group Number
Assign extensions to Internal
Paging Zones. An extension must
be assigned to a 2-digit zone in
order to access any of the 2-digit
zones.
Internal Page Zones: 0,
1~9, 00, 01~64
0~64
(0 = No Setting)
Default:
0 for IP Station
1 for TDM Station