Issue 5.0 UNIVERGE SV8100
1 - 776 Park
A user can display the Caller ID of a call in Park if Caller ID is enabled (1) in Program
20-09-02.
Park keys can be assigned on DSS consoles.
Calls on virtual extension keys cannot be put in Personal Park if Program 15-18-01 is set to
Land on the key (1).
Function keys simplify Park operation.
One Touch keys programmed for Park Hold Service Code cannot be used to park calls
without using Hold or Transfer.
Call Park – Step Call is supported in the local system only.
A parked call cannot be retrieved from Hold Dial Tone (Second dial tone).
When a call is parked from a virtual extension, th evirtual extension is released.
When parking a call from a virtual extension, Programs 15-02-01 and 15-18-01 must be set
to 1.
Park group assignment is by the terminal extension, not the virtual extension.
When a call parked from a virtual extension recalls, it will ring th eterminal the virtual
extension is programmed on, not the virtual extension key.
Status
Using 3-Digit
Service Code
Using 1-Digit
Service Code
Using
Personal
Park Key
Speaking Not Available Not Available Available
ICM Dial Tone or Busy Tone Available Not Available Available
Calling Another Extension Not Available Available
(with outside call
on hold and when
called extension
does not answer)
Available
Receiving a Personal Park Recall Not Available Not Available Available
To Next Page
Loading...
