NEC Univerge SV8100 - Page 799

UNIVERGE SV8100 Issue 5.0
Power Failure Transfer 1 - 789
Guide to Feature Programming
Operation
None
Program
Number
Program Name Description/Comments Assigned Data
14-02-09 Analog Trunk Data Setup – Busy
Tone Detection
Use to set the basic options for
each analog trunk port.
0 = Disable
1 = Enable
(default = 0)
14-02-14 Analog Trunk Data Setup – Loop
Start/Ground Start
Use to set the basic options for
each analog trunk port.
0 = Loop Start (Loop)
1 = Ground Start
(Ground)
(default = 0)