NEC Univerge SV8100 - Page 802

Issue 5.0 UNIVERGE SV8100
1 - 792 Prime Line Selection
Required Component(s)
None
Related Features
Central Office Calls, Placing
Direct Inward Dialing (DID)
Direct Inward Line (DIL)
Direct Inward System Access (DISA)
Line Preference
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
14-05-01 Trunk Group – Trunk Group
Number
Assign Prime Line to a separate
trunk group for outgoing Prime
Line selection. (Also refer to
Program 14-06 and Program
21-02.)
Trunk Group Number:
0~100 Priority Number:
1~200 (default = Trunk
Group 1, with priority in
ascending order.)
14-06-01 Trunk Group Routing – Priority
Order Number
Used to set the priority order
number 1~4.
0 = Not Specify1~100 :
(Trunk Group
Number)1001~1100 :
(1000 + Route Table
Number)
Default:
Route 1, Order
Number 1 = 1 (Trunk
Group 1)
Order Numbers 2, 3, 4
= 0 (Not Specified)
All Other Routes
(2~100) and Order
Numbers (1~4) = 0
(Not Specified)