NEC Univerge SV8100 - Page 816

Issue 5.0 UNIVERGE SV8100
1 - 806 Programmable Function Keys
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
15-07-01 Programmable Function Keys Assign the functions of a multiline
terminal Programmable Function
Keys. When using Program
15-07-01 to program the function
keys 17~32 on the D16(LD)-R
ADM start with key 17. Service
codes 851 and 852 can also be
used to program these keys.
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
15-20-01 LCD Line Key Name Assignment Used to define the Line Key Name
for line keys on DESILESS
terminals.
Up to eight digits
Up to 13 characters
Key Number:
01~16 (for 16LD TEL)
17~32 (for 16LD ADM)
Default:
LK01 CO001
: :
LK08 CO006
LK09 All Blank
: :
LK32 All Blank
20-06-01 Class of Service for Extensions Assign Class of Service (1~15) to
extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
20-07-10 Class of Service Options
(Administrator Level) –
Programmable Function Key
Programming (Appearance
Level)
Turns Off (0) or On (1) the ability
for an extension to program the
Appearance function keys using
Service Code 852.
When programming a feature
as a Programmable Function
Key, refer to Program
15-07-01 in the UNIVERGE
SV8100 Programming
Manual.
0 = Off
1 = On
(default = 1 for COS
01~15)
20-13-18 Class of Service for Options
(Supplementary Service) –
Programmable Function Key
Programming (General Level)
Turns Off (0) or On (1) an
extension user ability to program
General function keys using
Service Code 851 (by default).
(Refer to Program 20-07-10 for
Service Code 852.)
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-13-49 Class of Service for Options
(Supplementary Service) – BLF
Indication on CO Incoming State
Turn on (1) or Off (0) the BLF
Indication on CO Incoming State.
0 = Off
1 = On
(default = 0 for
COS 1~15)