NEC Univerge SV8100 - Page 820

Issue 5.0 UNIVERGE SV8100
1 - 810 Pulse to Tone Conversion
Required Component(s)
CD-4COTB, PZ-4COTF
- OR -
CD-4ODTA
- OR -
CD-CCTA
Related Features
Central Office Calls, Placing
Multiple Trunk Types
Guide to Feature Programming
Operation
To convert your telephone dialing to tone after placing your call on a pulse line:
1. Place a call over pulse line.
2. Dial
# to switch the DP trunk to DTMF dialing.
Program
Number
Program Name Description/Comments Assigned Data
14-02-01 Analog Trunk Data setup –
Signaling Type (DP/DTMF)
At default, Program 14-02-01 is
set to 2 (DTMF).
0=Dial Pulse (10 PPS)
1=Dial Pulse (20 PPS)
2=DTMF
(default = 2)
14-02-07 Analog Trunk Data Setup – DP to
DTMF Conversion Options
For each trunk, set the type of DP
to DTMF Conversion required:
automatic (0), automatic and
manual (1), or manual (2).
0 = Automatic
1 = Automatic and
Manual
2 = Manual
(default = 2)