NEC Univerge SV8100 - Page 847

UNIVERGE SV8100 Issue 5.0
Ring Groups 1 - 837
22-02-01 Incoming Call Trunk Setup Assign the incoming trunk type (0)
for each trunk. There is one item
for each Night Service Mode.
. This option must be set to 0
for Ring Groups to work.
Day/Night Mode: 1~8
0 = Normal
1 = VRS (second dial
tone if no VRS
installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
22-04-01 Incoming Extension Ring Group
Assignment
Assign extensions to ring groups. Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring
for incoming Ring
Group 1 calls. No
other extensions ring
for incoming Ring
Group 1 calls.
22-05-01 Incoming Trunk Ring Group
Assignment
Assign trunks to ring groups. Incoming Group
Number for Day/Night
Mode (1~8):
0 (No Setting)
001~100
(Incoming Group)
102 (In-Skin/ External
Voice Mail or InMail)
(default = 1)
22-06-01 Normal Incoming Ring Mode Define whether or not an
extension should ring for the
Normal Incoming Ring Mode.
0 = No Ring
1 = Ring
(default = 1)
22-08-01 DIL/IRG No Answer Destination For DIL Delayed Ringing, assign
the DIL No Answer Ring Group.
An unanswered DIL rings this
group after the DIL No Answer
Time (Program 22-01-04) expires.
DIL Delayed Ringing can also
reroute outside calls ringing a Ring
Group In-Skin/External Voice Mail,
or Centralized Voice Mail.
0 (No Setting)
001~100
(Incoming Ring Group)
102 (In-Skin/
External Voice Mail
or InMail)
(default = 1)
Program
Number
Program Name Description/Comments Assigned Data