NEC Univerge SV8100 - Page 857

UNIVERGE SV8100 Issue 5.0
Room Monitor 1 - 847
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
11-14-17 Service Code Setup (for Hotel) –
Hotel Room Monitor
Customize the service code (770
by default) to be used for Room
Monitor.
MLT, SLT
(default = 770)
3
15-07-01 Programmable Function Keys Assign a function key as a Room
Monitor key (code 39) for both the
extension being monitored and the
extension initiating Room Monitor.
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
3
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to an extension.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
3
20-13-11 Class of Service Options
(Supplementary Service) – Room
Monitor, Initiating Extension
Turns Off (0) or On (1) an
extension user ability to Room
Monitor other extensions.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-13-12 Class of Service Options
(Supplementary Service) – Room
Monitor, Extension Being
Monitored
Turns Off (0) or On (1) an
extension ability to be monitored
by other extensions.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
42-03-12 Class of Service Options (Hotel/
Motel) – SLT Room Monitor
Enable (1) or disable (0) a single
line telephone ability to use Room
Monitor.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3