NEC Univerge SV8100 - Page 862

Issue 5.0 UNIVERGE SV8100
1 - 852 Save Number Dialed
Related Features
Automatic Route Selection
Central Office Calls, Placing
Dial Tone Detection
Last Number Redial
Programmable Function Keys
Repeat Redial
Guide to Feature Programming
Operation
To save the outside number you just dialed (up to 24 digits):
.
Use this feature before hanging up.
Multiline Terminal
1. Press the Save Number Dialed key (Program 15-07 or SC 851: 30).
Single Line Telephone
Program
Number
Program Name Description/Comments Assigned Data
11-12-13 Service Code Setup (for Service
Access) – Saved Number Dial
Customize the service code to be
used for dialing a saved number.
MLT, SLT
(default = 815)
11-12-18 Service Code Setup (for Service
Access) – Clear Saved Number
Dialing Data
Define the service code for Clear
Save Number Dialing List if it is
not acceptable.
MLT, SLT
(default = 885)
15-07-01 Programmable Function Keys Assign a function key as a Save
key (code 30).
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)