NEC Univerge SV8100 - Page 873

UNIVERGE SV8100 Issue 5.0
Selectable Display Messaging 1 - 863
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
11-11-14 Service Code Setup (for Setup/
Entry Operation) – Text Message
Setting
Define the service code to be used
when setting a text message.
MLT
(default = 836)
15-07-01 Programmable Function Keys Assign a function key for Text
Message (code 18). The Text
Message key automatically
selects the message used when
programming the key.
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
20-01-02 System Options – Text Message
Mode
Select whether and intercom caller
should hear busy (1) or ring
through (0) for extensions which
have Selectable Display
Messaging set.
. Any extension previously set
with Selectable Display
Messaging must cancel the
feature and reactivate for a
change in this option to take
affect.
0 = Call mode
1 = No Answer/
Busy mode
(default = 1)
20-02-07 System Options for Multiline
Telephones – Time and Date
Display Mode
Set the System Time and Date
display mode. The time that
displays in Selectable Display
Messages follows this setting.
1~8
Type 1 = (12 hour) 10
MAR TUE 3:15PM
Type 2 = (12 hour)
3:15PM MAR 10 TUE
Type 3 = (12 hour)
3-10 TUE 3:15 PM
Type 4 = (12 hour)
3:15PM TUE 10 MAR
Type 5 = (24 hour) 10
MAR TUE 15:15
Type 6 = (24 hour)
15:15 MAR 10 TUE
Type 7 = (24 hour)
3-10 TUE 15:15
Type 8 = (24 hour)
15:15 TUE 10 MAR
(default = 3)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to an extension.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1