Issue 5.0 UNIVERGE SV8100
1 - 866 Selectable Display Messaging
3. Enter message number
4. + enter digits to append (if needed) + Speaker to hang up. Skip the remaining steps.
5. (Optional for messages 1~8 and 10.)
Dial the digits you want to append to the message.
. You can append messages 1~8 and 10 with digits (e.g., the time when you will be back). Enter the time in 24-hour
format.
6. Press Speaker to hang up.
. Intercom calls to extensions with Selectable Display Messaging set receive a DND signal and receive the display
message on their telephone display instead of ringing the extension based on the setting in Program 20-01-02.
. To allow calls to ring through and have the message displayed on the calling extension display, cancel DND by
pressing DND + 0.
To cancel a message:
1. Press Speaker and the Text Message key (Program 15-07 or SC 851: 18).
2. Press Speaker to hang up.
.
To Next Page
Loading...
