Issue 5.0 UNIVERGE SV8100
1 - 872 Serial Call
Related Features
Programmable Function Keys
Transfer
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
15-02-05 Multiline Telephone Basic Data
Setup – Transfer Key Operation
Mode
Use this option to set the operating
mode of the extension Transfer
key. The keys can be for Call
Transfer, Serial Calling or Flash.
When selecting the Flash option
(selection 2), refer also to Program
81-01-14.
0 = Transfer
1 = Call back
2 = Hook
(default = 0)
15-07-01 Programmable Function Keys Assign a programmable key as a
Serial Call key (code 43).
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
To Next Page
Loading...
