UNIVERGE SV8100 Issue 5.0
Single Line Telephones 1 - 885
Operation
Refer to the individual features listed in the Related Features section above in this feature.
80-04-04 Call Progress Tone Detector
Setup – No tone time
Use this option to set No Tone
Time.
0~255 (30+30-
7680ms)
default:
Type 1 (DT) – 132
(3990ms)
Type 2 (BT) – 132
(3990ms)
Type 3 (RBT) – 132
(3990ms)
Type 4, Type 5 – 0
82-11-01 LCA Initial Setup – Bounce
Protect Time
Specify a time for detection of a
valid 0ff-Hook indication that is
long enough to prevent an
unintentional bounce of the
receiver from being detected as a
new Off-Hook indication from a
Single Line Telephone.
0 = No Setting
1~15 = 100ms~1.5sec
(default = 3)
82-11-02 LCA Initial Setup – HookFlash
Start Time
Specify the minimum hookflash
time from a Single Line Telephone
or analog Voice Mail system
before it is detected as the
beginning of a valid hookflash.
0 = 40ms
1~15 = 90ms~790ms
(default = 5 [290ms])
82-11-03 LCA Initial Setup – HookFlash
End Time
Define various timers for the SLI
ETUs. The entries you make in
this program affect all SLI ETUs
installed.
0 = HST+0ms 1~15 =
HST+100ms~HST+15
00ms
(HST=Hookflash Start
Time)
(default = 7)
Program
Number
Program Name Description/Comments Assigned Data
To Next Page
Loading...
