NEC Univerge SV8100 - Page 936

Issue 5.0 UNIVERGE SV8100
1 - 926 Speed Dial – Telephone Book
Related Features
Speed Dial – System/Group/Station
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
11-11-56 Service Code Setup (for Setup/
Entry Operation) – Telephone
Book Lock Service
Password to unlock telephone
book.
m Dial the password then it
prompts you for an extension
number to unlock. Type in the
ext number you want to unlock
then you will be prompted for
the password. Type in the
password and then the
telephone book is unlocked.
When you dial the password to
unlock the telephone book it
removes the entry in 15-19-06
so the book is not locked
anymore.
m To lock the telephone book do
the same steps as above when
the book is already unlocked.
It will then assign 15-19-06 for
you.
MLT, SLT
(default = no setting)
13-07-01 Telephone Book Dial Number
and Name – Speed Dialing Data
Assign telephone numbers to
entries in each book. There are
100 books with 300 hundred
entries (0-299) in each book.
Maximum 24 digits
1~9, 0,
*, #,
Pause (Press line key
1),
Recall/Flash (Press
line key 2),
@ = Code to wait for
answer supervision in
ISDN (Press line key 3)
(default = no setting)
13-07-02 Telephone Book Dial Number
and Name – Name
Assign a name to each telephone
number.
Maximum 12
Characters
(Use dial pad to enter
name)
(default = no setting)