NEC Univerge SV8100 - Page 970

Issue 5.0 UNIVERGE SV8100
1 - 960 Station Relocation
System Availability
Terminals
All Multiline Terminals and Single Line Telephones
Required Component(s)
None
Related Features
None
Guide to Feature Programming
 The following programs are swapped when Station Relocation is used:
 Program 11-02 Extension Numbering
 Program 12-05 Night Mode Group Assignment for Extensions
 Program 13-03 Speed Dialing Group Assignment for Extensions
 Program 15-01 Basic Extension Data Setup
 Program 15-02 Multiline Telephone Basic Data Setup
Program
Number
Program Name Description/Comments Assigned Data
11-15-12 Service Code Setup,
Administrative (for Special
Access – Extension Data Swap
Ext. Data Swap = xxx (service
code in accordance with Program
11-01).
MLT
(default not assigned)
20-13-42 Class of Service Options
(Supplementary Service) –
Extension Data Swap Enabling
Turn off or on an extensions ability
to use the Station Relocation
feature.
0 = Off
1 = On
(default = 1 for
COS 1~15)
92-05-01 Extension Data Swap Password
– Password
Fixed 4-Digits. Fixed four digits (No
setting at default)
(default not assigned)