Issue 5.0 UNIVERGE SV8100
1 - 972 Tandem Trunking (Unsupervised Conference)
Related Features
Call Forwarding, Off-Premise
Central Office Calls, Answering
Central Office Calls, Placing
Direct Inward System Access (DISA)
Guide to Feature Programming
Method A – Tandem Trunking from Conference
Program
Number
Program Name Description/Comments Assigned Data
11-12-57 Service Code Setup (for Service
Access) – Tandem Trunking
If the default service code (753) for
Tandem Trunking is not
acceptable, change the code as
required.
MLT, SLT
(default = 753)
14-01-04 Basic Trunk Data Setup –
Transmit Gain Level for
Conference and Transfer Calls
Select the Transmit CODEC gain
level used by the trunk when it is
part of an Unsupervised
Conference.
1~63(-15.5dB ~
+15.5dB in 0.5dB
intervals)
[default = 32 (0dB)]
14-01-05 Basic Trunk Data Setup –
Receive Gain Level for
Conference and Transfer Calls
Select the Receive CODEC gain
level used by the trunk when it is
part of an Unsupervised
Conference.
1~63(-15.5dB ~
+15.5dB in 0.5dB
intervals)
[default = 16 (-8dB)]
14-01-13 Basic Trunk Data Setup – Trunk-
to-Trunk Transfer
For each trunk that should be able
to participate in a tandem call,
enter 1.
0 = Disable
1 = Enable
(default = 1)
15-07-01 Programmable Function Keys (Optional) Assign a function key
for Transfer (code 06).
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to an extension.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
To Next Page
Loading...
