NEC Univerge SV9100 - Page 31

UNIVERGE SV9100
Issue 1.0
System Maintenance Manual
19
Install amplifier.
External amplifier or PRG 11-01
and PRG 11-10 ~
PRG 11-15
1. Reset/replace PGD(2)-U10 ADP, and test.
2. Perform Second Initialization, and test; then perform
First Initialization and test.
3. Replace GCD-CP10 and test using default program.
Place Test Set on output of paging at
chassis port or PGD(2)-U10 ADP with all
external wiring removed.
Check PRG 11-01 and PRG 11-10 ~ PRG 11-15
for correct access code (external) for paging.
External Paging Problems
Yes
No
Amplifier
provided?
Yes External
No
page heard on test set?
No
Access Code
correct?
Yes
G1
Pass
Retest using correct
access code.
Fail
Done.