NEC Univerge SV9100 - Page 96

84
Issue 1.0
UNIVERGE SV9100
System Maintenance Manual
90-11-07
System Alarm Report – SMTP Host Port
Number
When Alarm Reports are to be emailed, set
the SMTP host port number. Contact your
ISP (Internet Service Provider) for the correct
entry if needed.
0 ~ 65535
25
90-11-08
System Alarm Report – To E-mail Address
When Alarm Reports are to be emailed, set
this email address to where the report should
be sent.
Maximum of 255 characters
No Setting
90-11-09
System Alarm Report – Reply Address
When Alarm Reports are to be emailed, set
the email address where replies should be
emailed.
Maximum of 255 characters
No Setting
90-11-10
System Alarm Report – From Address
When Alarm Reports are to be emailed, set this
email address for the station sending the report.
Maximum of 255 characters
No Setting
90-11-11
System Alarm Report – DNS Primary
Address
When Alarm Reports are to be emailed, set the
DNS primary address.
0.0.0.0 ~ 255.255.255.255
0.0.0.0
90-11-12
System Alarm Report – DNS Secondary
Address
When Alarm Reports are to be emailed, set the
DNS secondary address.
0.0.0.0 ~ 255.255.255.255
0.0.0.0
90-11-13
System Alarm Report – Customer Name
When Alarm Reports are to be emailed, enter a
name to identify the particular system.
Maximum of 255 characters.
No Setting
90-25-01
System Alarm Report CC Mail Setup – CC
Mail Address
Define the mail address to receive the system
alarm report CC Mail setup.
Maximum of 255 characters
No Setting
90-50-01
System Alarm Display Setup – System
Alarm Display Telephone
Define the extension number that Alarm
Reports are displayed on.
Maximum of eight digits
No Setting