NEC Univerge SV9100 - Page 97

UNIVERGE SV9100
Issue 1.0
System Maintenance Manual
85
InMail SMTP Setup:
Program
Number
Program Name/Description
Input Data
Default
47-18-01
InMail Setup – SMTP Enabled
Enables the SMTP forwarding feature for the
system.
0 = No
1 = Yes
0
47-18-02
InMail Setup – Server Name
Sets the SMTP server name. If the DNS server
setting is not assigned in Program 90-11-11, the
IP Address must be used instead of the name.
Maximum of 48 characters
No Setting
47-18-03
InMail Setup – SMTP Port
Sets the SMTP server port.
0 ~ 65535
25
47-18-04
InMail Setup – Encryption
Enable SSL Encryption.
0 = No
1 = Yes
0
47-18-05
InMail Setup – Authentication
Enables authentication, when set to 2 (POP3)
refer to Programs 47-19-xx.
0 = No
1 = Yes
3 = POP3
0
47-18-06
InMail Setup – User Name
Set the user name for SMTP authentication.
Maximum of 48 characters
No Setting
47-18-07
InMail Setup – Password
Set the password for SMTP authentication.
Maximum of 48 characters
No Setting
47-18-08
InMail Setup – E-mail Address
Set the email address for the system. This is
the “from address” for outgoing emails.
Maximum of 48 characters
No Setting
47-18-09
InMail Setup – Reply to Address
Set the email address for replies to outgoing
emails. This email account is not monitored
by the system and must be checked
manually.
Maximum of 48 characters
No Setting