NEC UX5000 Installation Manual

Multimedia Conference Brid
g
e Installation Manual 1 - 1
__________________________________________________________________________________
___________________________________________________________________________________
C
C
h
h
a
a
p
p
t
t
e
e
r
r
1
1
Loading the CompactFlash Application
in the PVAU
S
ECTION
1D
ESCRIPTION
The PVAU blade provides the hardware platform for providing connectivity for the
system. By default, this blade is shipped from NEC with "platform support" (factory
default) firmware. A functional firmware is loaded as part of the installation to support
the desired functionality.
In this document, the procedure for loading a CompactFlash (CF) into the PVAU is
provided. The same procedure applies for any other applications (e.g., IVR).
✎ Verify the firmware prior to installing the application.
✎ Access to this website requires technician login privileges.
S
ECTION
2L
OADING THE
S
ERVICE
P
ACKAGE
1. Ensure the Compact flash is removed. Insert the blade in any interface slot in
the chassis.
2. The blade Default IP Address is: 192.168.1.100 . Set your PC so that it is
statically assigned an IP address of 192.168.1.xx with a subnet mask of
255.255.255.0 to ensure it is in the same network as the PVAU blade.
3. Point the Internet Explorer (Version 5 or higher) on the PC to 192.168.1.100 by
entering this address in the navigation bar.
✎ The Internet Explorer must not use any Proxy settings.
4. Login using the following information:
Default Login ID = admin (lowercase)
Default Password = password (lowercase)

NEC UX5000 Specifications

General

Brand	NEC
Model	UX5000
Category	Telephone
Language	English