NEC UX5000 - XML Terminal; Terminal Configuration Setup

UX5000 Issue 1.0
Multimedia Conference Bridge Installation Manual 5 - 41
___________________________________________________________________________________
___________________________________________________________________________________
SECTION 8 XML TERMINAL
The Conference Bridge Application, apart from the web interface which is used for
scheduling the conferences and the administration work, has another simple interface
called XML interface. The XML interface allows the user to schedule simple
conferences. It can be accessed by using the NEC’s XML phone emulators as well as
the IP-CTS terminal.
To access and view the XML Application on the XML-capable UX5000 terminals,
certain criteria need to be met. Terminal configuration needs to have the XML
Application URL entered and XML enabled in the terminal menu settings.
8.1 Terminal Configuration Setup
NEC IP terminals can be configured in one of three ways:
 Manual handset programming
 IP Manager application or Auto Configuration settings
 Web browser*
* This instruction follows the web browser setup procedure. Consult the
corresponding IP terminal manuals if one of the other two methods
are desired.