NEC UX5000 - Locale Configuration

UX5000 Issue 1.0
Multimedia Conference Bridge Installation Manual 5 - 37
___________________________________________________________________________________
___________________________________________________________________________________
6.2.1.2 Locale Configuration
The Locale Configuration window, accessed from the
Conference Settings window, allows the administrator to
select the current geographical location and the associated
language for the Conference Bridge Web application.
✎ When a new language pack is installed, it is listed on the
Locale Configuration window. Users can make the selection of
locale for the user interface.
Locale: Select the geographical location.
✎ When a locale is selected, the interface user is logged out of
current session and prompted to log in again to the Web
Interface.
To apply these settings, click Close to return to the Main Menu.
On the Main Menu, click Apply.
Figure 5-25 Locale Configuration Window