NEC UX5000 - Enable XML Application on the XML Terminal; Section 8 XML Terminal

5 - 44 Multimedia Conference Bridge Application Web Manager
___________________________________________________________________________________
___________________________________________________________________________________
Issue 1.0 UX5000
8.3 Enable XML Application on the XML Terminal
1. Press the terminal’s Menu key.
2. Select #2 or touch the Tool icon.
3. Select #1 or touch the Service Text.
4. The display asks for your PIN that was set up for your individual
conference user. Enter the personal user name and PIN using the
terminal dial pad and press the Login Soft Key.
✎ The XML client will require user login credentials. This information should
be the same user name and password issued by the conference
administrator.
Figure 5-32 Terminal Menu Key
Figure 5-33 LED Display
Menu Button