NEC UX5000 - Conference Call Control Flow

Multimedia Conference Brid
g
e Installation Manual E - 1
__________________________________________________________________________________
___________________________________________________________________________________
C
C
h
h
a
a
p
p
t
t
e
e
r
r
E
E
Outgoing Call Flow
SECTION 1INTRODUCTION
This appendix describes outgoing call flow.
SECTION 2CONFERENCE CALL CONTROL FLOW
1. If the organizer wants to bring in a participant into the conference, during the
conference, they make an outgoing call.
2. To initiate an outgoing call, the organizer dials the DTMF (Access) Code
previously assigned by the administrator. The conference engine prompts the
organizer to dial the phone number of the participant to be added to the
conference.
3. Once the phone number is dialed, the conference engine initiates the call. If the
engine succeeds in making the call, the organizer is allowed to talk with the
called participant. If the password was not previously communicated to the
incoming participant, the organizer can inform the participant of the conference
password at this time.