UX5000 Issue 1.0
Multimedia Conference Bridge Installation Manual 5 - 21
___________________________________________________________________________________
___________________________________________________________________________________
6.1.1.2 Bridge Configuration
The Bridge Configuration window, accessed from the
Conference Settings window, allows the administrator to
configure some of the Conference Bridge parameters.
Conference Bridge Number: Enter the number for the
Conference Bridge.
Ports Capacity on Board: Select the number of ports for
which the application is licensed.
Reserved Ports for Present Conference: Enter the number
of ports that are reserved for preset conferences.
Max. Conf. Duration: Enter the maximum length of time for the
conference.
End Tone Alert Time: Enter the time that the end tone alert is
played. Conference participants hear a beep tone at the
stipulated time assigned in this field.
Use Custom Greeting: Check the box for this field if the
Conference Bridge is enabled to play a customized welcome
message instead of the factory default message.
✎ Use the Export/Import window to upload a customized
greeting to the Conference Bridge.
Figure 5-14 Bridge Configuration Window
To Next Page
Loading...
