5 - 30 Multimedia Conference Bridge Application Web Manager
___________________________________________________________________________________
___________________________________________________________________________________
Issue 1.0 UX5000
Interface Log Level: Enter the Interface log level settings.
This field sets the log message levels for the interface layer of
the Web Interface application. Any message logged in the
Interface layer follows these log settings.
Application Log Level: Enter the Application log level setting.
This field sets the log message levels for the application log
messages. The application log messages are the messages
logged by the Call Flow component of the Multimedia
Conference Bridge.
Engine Log Level: Enter the conference engine log level
setting. This field is used to set the log message level for the
Conference Engine component. Any log message, generated
by the Conference Engine, is logged (if the log setting is other
than None).
To apply these settings, click Close to return to the Main Menu.
On the Main Menu, click Apply.
To Next Page
Loading...
