NEC Xen Topaz - Optional Interface Cards (Installed into the KSU); Exifu-A1

Xen Topaz System Hardware Manual
The Components - 11
Doc. No. 8846 - Release 1.1 September 2004
S ECTION 5
OPTIONAL INTERFACE
C
ARDS (INSTALLED
INTO THE KSU)
5.1 EXIFU-A1
This expansion interface card is installed into the "EXIFU" slot of the
924M KSU to provide the following functions. Either the EXIFU-A1 or
EXIFU-B1 can be installed in 924M KSU.
 1 Ethernet Port (10/100M)
Used for SMDR Reports, Alarm Reports, PC Programming (PCPro
and WebPro), and Main Software Upgrade.
 1 Serial Port (D-Sub 9 Pin)
Used for SMDR Reports, Alarm Reports, PC Programming
(PCPro), and Modem Connection.
 1 CF Slot
For storing System Data Backup and Restore, and Main Software
Upgrade.
 2 System Expansion Connectors (RJ45)
Not Used.
5.2 EXIFU-B1
This expansion interface card is installed into the "EXIFU" slot of the
924M KSU to provide the following functions. Either the EXIFU-A1 or
EXIFU-B1 can be installed in 924M KSU.
 1 Serial Port (D-Sub 9 Pin)
Used for SMDR Reports, Alarm Reports, PC Programming
(PCPro), and Modem Connection.