Xen Topaz System Hardware Manual
Installing the Optional Equipment - 57
Doc. No. 8846 - Release 1.1
September 2004
3. Mount the DSPDB-A1 PCB to the "CN6" Connector at the Main
(924M) KSU.
3.5 Installing the CF-B1
1. Remove the CF Card from the DSPDB-A1 PCB.
2. Insert the CF-B1 into the CF slot of DSPDB-A1 PCB. This new
package is now referred to as DSPDB-A2 PCB.
3. Install the DSPDB-A2 PCB to the 924M KSU. (Refer to the previous
• For easy installation, DSPDB-A1 PCB is recommended to install before
308E/008E installations.
To Next Page
Loading...
