NEC Xen Topaz - Unpacking; Installing the 308 E;008 E PCB

September 2004 NEC Business Solutions Ltd
30 - Trunk/Extension Cabling and Installing the Expansion PCBs
Doc. No. 8846 - Release 1.1 September 2004
2.2 Unpacking
Unpack the 308E/008E and check it against the following list. Inspect
for physical damage.
2.3 Installing the 308E/008E PCB
1. Open and pull out the Sub-Cover.
2. Loosen two screws and remove the Main-Cover.
3. Insert two Nylon-Spacers into the specified holes, and fasten two
Metal-Spacers into the specified holes. (Both Nylon and Metal
Items List of Contents QTY
308E-A1 308E-A1 PCB 1
Nylon Spacers 2
Metal Spacers 2
Screws 2
008E-A1 008E-A1 PCB 1
Nylon Spacers 2
Metal Spacers 2
Screws 2