NEC Xen Topaz - Installing the Optional Pcbs to the OPBOX

Xen Topaz System Hardware Manual
Installing the Optional Facilities - 63
Doc. No. 8846 - Release 1.1 September 2004
6. Fasten six screws to fix the OPBOX to KSU.
1.4 Installing the Optional PCBs to the OPBOX
1. Insert the Option PCBs into the universal slot at OPBOX. Fasten
the PCB using the captive screw/bracket marked TB1.
2. Replace the OPBOX Cover.
3. After connecting the cables, replace the OPBOX Sub-Cover. (Hook
• The screws are attached to the OPBOX.