P 268 rev. 1.0 07-2006Technician Menu
2. Set parameters
2.1 Cash
2.1.1 Prices
2.1.1.1 Set indiv. price
2.1.1.2 Set glob. prices
2.1.1.3 Time schedule
2 Setting the parameters
2.1 Cash
This set of functions controls all parameters regarding the
payment systems and the sales prices.
2.1.1 Prices
Four different prices can be set for each selection according to
the programmed time bands for when the time table option is
enabled.
For each of the 4 time bands prices (0 to 65,535) can be
programmed globally (same price for all selections) or for the
single selections.
Should the majority of products be sold at the same price, it
will be convenient to set the price globally and then change the
figure of the selections with different prices.
2.1.1.1 Setting single prices
This function is used for setting a different price for each
selection.
2.1.1.2 Setting global prices
This function is used for setting one price for all available
selections.
2.1.1.3 Time bands
Four programmable time bands are provided for selling
products at different prices.
The time periods are programmable for beginning and end
time by hours (00 to 23) and minutes (00 to 59).
If the values for start and end of the time band are set to
00.00 the time period is disabled.
The reference time is kept by an internal clock, programmable
as:
day/month/year week-day 1-7 and then hour/minutes/seconds.
If the values for start and end of the time band are set to
00.00 the time period is disabled.
To Next Page
Loading...
Need help?
General
